Porcelain tile over ceramic tile? - agents for ceramic artists
The shiny surface of the tile, put up a slab of concrete - that it has to jump 15 years or longer, without paying. Is it necessary for the rough surface before the tile, if so, how? I tried grinding (60 GRIT), wire brush - no effect on the surface. I live in a small town - we have a part of The Home Depot - they sell a good binder? If so, what? Thank you for your answer!
Wednesday, February 3, 2010
Agents For Ceramic Artists Porcelain Tile Over Ceramic Tile?
2 comments:
Moving tiles I have both flex and thinset VesaBond Bond uses custom made Building Products, both of which are normally sold at Home Depot .. A proposal for the slabs to allow several days drying time before foot traffic in the new tab. The moisture has nowhere to go if you do this and extra time required for drying.
Add no latex additive when using a type of polymer thin, thin sole basis of latex ..
Grinding is usually not necessary, clean, oil and grease tiles.
All the questions you can e-mail about my avatar and check my notes here. GL
I'm over stoneware with long-term results. Make sure the surface is clean and free of foreign matter, even the best of times fragile and U may also increase a latex additive for resistance to the fine series.
Post a Comment